About
CT
Project
No.1
The
Agency owns and operates five dual fuel, quick-response Combustion Turbine
units (G.E. frame 5). The units are located in the cities of Alameda,
Roseville, and Lodi. The units are sources of reserve capacity, spinning
reserves, and peaking energy.
The
plants provide local electric generating resources within the cities, which are
then capable of directly serving electrical loads in the event of transmission
line outages or other emergencies. Each unit can be operated separately and
started remotely from NCPA Central Dispatch in Roseville.
Members
participating in the Combustion Turbine Project are: the cities of Alameda,
Healdsburg, Lodi, Lompoc, Roseville, Santa Clara, Ukiah and the Plumas Sierra
Electric Cooperative.
Project
No.2
The Agency's CT
Project Number 2 became operational in April of 1996. It is
located in Lodi and consists of a 49.9 MW steam injected (STIG) General
Electric LM-5000 CT unit. A STIG cycle is a simplified alternative
to a combined cycle without the need for a steam turbine, condenser,
circulating water loop and cooling tower. A STIG unit has the
advantage of lower capital costs than a combined cycle plant, but still
relatively high efficiencies.
NCPA's STIG
facility utilizes a heat recovery steam generator (HRSG) to produce
steam used to enhance power production, improve efficiency, and reduce
the emissions of oxides of nitrogen. Unlike a conventional
combined cycle plant, the steam is used directly in the CT unit instead
of a separate steam turbine. Approximately 120,000 pounds per hour
of steam are produced from the HRSG.
Wastewater is
reclaimed from the City of Lodi's White Slough water pollution control
facility to produce the steam needed for power enhancement and emissions
control. The wastewater is processed to eliminate contaminants
before being used in the turbine.
The water
treatment processes include mega filtration, reverse osmosis, ultra filtration
and de-mineralize polishing. Following the
processes, the treated water is stored in a 120,000-gallon tank until it
is needed. The facility uses approximately 900 gallons per minute
of wastewater to produce 120,000 pounds (14,388 gallons) per hour of
steam. The facility is connected to PG&E's transmission
system.